Nortel DMS-100 Series Replacement Procedures page 319

8 Seat and lock the card.
a Using your fingers or thumbs, push on the upper and lower edges of the
faceplate to ensure the card is fully seated in the shelf.
b Close the locking levers.
9 Use the following information to determine the next step in this procedure.
If you entered this procedure
from
an alarm clearing procedure
other
DMS-100 Family NA100 Card Replacement Procedures Volume 4 of 7 LET0015 and up
XPM card replacement procedures
in an RSC RMM
Do
step 15
step 10
1-287
NT2X11
(continued)