Nortel DMS-100 Series Replacement Procedures page 502

1-470 XPM card replacement procedures
NT2X70
in an RLCM HIE
18
19
At the IOE frame
20
At the MAP display
21
22
23
297-8021-547 Standard 14.02 May 2001
(continued)
and pressing the Enter key.
If
message "loadfile not found in
directory" is not received
load passed
load failed
Determine the type of device on which the PM load files are located.
If load files are located on
tape
IOC disk
SLM disk
Locate the tape that contains the PM load files.
Mount the tape on a magnetic tape drive.
Download the tape by typing
>MOUNT tape_no
and pressing the Enter key.
where
tape_no
is the number of the tape drive containing the PM load files
List the contents of the tape in your user directory by typing
>LIST T tape_no
and pressing the Enter key.
where
tape_no
is the number of the tape drive containing the PM load files.
Release the tape drive from your user directory by typing
>DEMOUNT T tape_no
and pressing the Enter key.
where
Do
step 18
step 34
step 38
Do
step 19
step 25
step 30