1-398 XPM card replacement procedures
NT2X59
in an RLCM-EDC RMM
7
8
297-8021-547 Standard 14.02 May 2001
(continued)
c
Make sure the replacement card has the same PEC, and PEC suffix, as
the removed card.
Open the locking levers on the replacement card.
Align the card with the slots in the shelf. Carefully slide the card into the shelf.
Seat and lock the card.
a
Use your fingers to push on the upper and lower edges of the faceplate,
reseat the card completely.
b
Close the locking levers.