Nortel DMS-100 Series Replacement Procedures page 841

Replacing an NT6X19 in RSC-S LCME
At your Current Location
1 Proceed only if you have been directed to this card replacement procedure
from a step in a maintenance procedure, are using the procedure for verifying
or accepting cards, or have been directed to this procedure by your
maintenance support group.
2 Obtain an NT6X19 replacement card. Ensure the replacement card has the
same product equipment code (PEC), including suffix, as the card that is to
be removed.
At the MAP terminal
3 Post the LEN of the card to be replaced by typing
>mapci;mtc;lns;ltp;post l site lcme _ no unit_no lsg _ no
ckt_no
and pressing the Enter key.
where
site
is the location name of the LCME with the faulty card
lcme_no
is the number of the LCME with the faulty card
unit_no
is the number of the LCME unit with the faulty card
lsg_no
is the number of the LSG with the faulty card
ckt_no
is the number of the circuit associated with the faulty card
Example of a MAP display:
DMS-100 Family NA100 Card Replacement Procedures Volume 4 of 7 LET0015 and up
in an RSC-S (DS-1) Model A LCME
XPM card replacement procedures 1-809
NT6X19
(continued)