Nortel DMS-100 Series Replacement Procedures page 368

1-336 XPM card replacement procedures
NT2X55
in an RSC RMM
8
9
297-8021-547 Standard 14.02 May 2001
(continued)
Seat and lock the card.
a Using your fingers or thumbs, push on the upper and lower edges of the
faceplate to ensure the card is fully seated in the shelf.
b Close the locking levers.
Use the following information to determine the next step in this procedure.
If you entered this procedure
from
an alarm clearing procedure
other
Do
step 14
step 10