Nortel DMS-100 Series Replacement Procedures page 689

a Locate the card to be removed on the appropriate shelf.
b Open the locking levers on the card to be replaced and gently pull the
card towards you until it clears the shelf.
c Ensure the replacement card has the same PEC, including suffix, as the
card you just removed.
7
DMS-100 Family NA100 Card Replacement Procedures Volume 4 of 7 LET0015 and up
XPM card replacement procedures
in an RSC RMM
DANGER
Equipment damage
Take these precautions when removing or inserting a card:
1. Do not apply direct pressure to the components.
2. Do not force the card into its slot.
1-657
NT3X82
(continued)