Nortel DMS-100 Series Replacement Procedures page 309

At the MAP display
5 To test the new NT2X11 card, type
>TST
and press the Enter key.
If TST
passed
failed
6 To return to service the circuits busied in step 3, type
>RTS
and press the Enter key.
If RTS
passed
failed
7 To send the faulty cards for repair follow the local procedures.
8 Record the items that follow in office records:
• date the replaced card
• serial number of the card
• indications that prompted replacement of the card
Go to Step 10
9 To replace this card you can obtain additional help. For additional help
contact the personnel responsible for next level of support.
10 You have completed this procedure.
DMS-100 Family NA100 Card Replacement Procedures Volume 4 of 7 LET0015 and up
XPM card replacement procedures
in an RLCM-EDC RMM
Do
step 6
step 9
Do
step 7
step 9
1-277
NT2X11
(end)