Nortel DMS-100 Series Replacement Procedures page 431

9 Use the following information to determine the next step in this procedure.
If you enter this procedure from
a procedure that clears an alarm
other than listed here
At the MAP display
10 To load the RMM, type
>LOADPM
and press the Enter key.
11 To test the RMM, type
>TST
and press the Enter key.
Example of a MAP response:
Test Passed
or
Test Failed
If TST
passes
fails
DMS-100 Family NA100 Card Replacement Procedures Volume 4 of 7 LET0015 and up
XPM card replacement procedures
in an RLCM-EDC RMM
Do
step 16
step 10
Do
step 12
step 17
1-399
NT2X59
(continued)