Nortel DMS-100 Series Replacement Procedures page 163

Replacing an NT2X06 card in an RMM
At your current location
1 Obtain a replacement card. Ensure that the replacement card has the same
product equipment code (PEC), including suffix, as the card to be removed.
2 If you were directed to this procedure from the Alarm Clearing Procedures ,
go to step 6. Otherwise, continue with step 3.
At the MAP terminal
3 Access the peripheral module (PM) level of the MAP display by typing
>MAPCI;MTC;PM
and pressing the Enter key.
4 Post the RMM by typing
>POST RMM rmm_no
and pressing the Enter key.
where
rmm_no
is the number of the RMM shelf where the card is to be replaced
Example of a MAP response:
SysB
PM
RMM
RMM 0
5 Busy the RMM by typing
>BSY
and pressing the Enter key.
DMS-100 Family NA100 Card Replacement Procedures Volume 4 of 7 LET0015 and up
XPM card replacement procedures
ManB Offl
0 2
1 0
SysB
in an RLCM RMM
CBsy
2 0
1 0
1-131
NT2X06
(continued)
ISTb InSv
7 21
0 6