Nt2X57 In An Iopac Rmm - Nortel DMS-100 Series Replacement Procedures

1-338 XPM card replacement procedures
NT2X57
in an IOPAC RMM
Application
Use this procedure to replace the following card in a remote maintenance
module (RMM).
PEC
NT2X57
Common procedures
The replaing a card procedure is referenced in this procedure.
Action
The following flowchart is a summary of the procedure. To replace the card,
use the instructions in the step-action procedure that follows the flowchart.
297-8021-547 Standard 14.02 May 2001
Suffix Name
AA Signal distribution card (type 1)