Nortel DMS-100 Series Replacement Procedures page 203

Application
Use this procedure to replace the following card in a remote maintenance
module (RMM).
PEC
NT2X09
Common procedures
The replacing a card procedure is referenced in this procedure.
Action
The following flowchart is only a summary of the procedure. To replace the
card, use the instructions in the step-action procedure that follows the
flowchart.
DMS-100 Family NA100 Card Replacement Procedures Volume 4 of 7 LET0015 and up
Suffix Name
AA Multioutput power converter
XPM card replacement procedures 1-171
in an IOPAC RMM
NT2X09