Nortel DMS-100 Series Replacement Procedures page 288

1-256 XPM card replacement procedures
NT2X10
in an RSC-S (DS-1) Model B RMM
8
297-8021-547 Standard 14.02 May 2001
DANGER
Equipment damage
Take these precautions when removing or inserting a card:
1. Do not apply direct pressure to the components.
2. Do not force the card into its slot.
Seat and lock the card.
a Using your fingers or thumbs, push on the upper and lower edges of the
faceplate to ensure the card is fully seated in the shelf.
b Close the locking levers.
(continued)