Nortel DMS-100 Series Replacement Procedures page 777

Replacing an NT6X18 in an ILCM
At the MAP
1 Obtain a replacement card. Ensure the replacement card has the same
product equipment code (PEC), including suffix, as the card that is to be
removed.
At the MAP terminal
2 Access the line test position (LTP) level of the MAP display and post the line
associated with the card to be replaced by typing
>MAPCI;MTC;LNS;LTP;POST L site lcm lsg ckt
and pressing the Enter key.
where
site
is the name of the site where the IOPAC is located
lcm
is the number of the ILCM with the faulty card
lsg
is the number of the line subgroup with the faulty card
ckt
is the number of the circuit associated with the faulty card
Example of a MAP response:
LCC PTY RNG .....LEN..........
1FR
3 Check the status of the posted line.
If the line status is
manual busy (ManB)
not Man B
4 Busy the line by typing
>BSY
and pressing the Enter key.
At the IOPAC cabinet
5 Go to the common replacing a line card procedure in this document. When
you have completed the procedure, return to this step.
DMS-100 Family NA100 Card Replacement Procedures Volume 4 of 7 LET0015 and up
XPM card replacement procedures
REM1 00 0 03 03 7213355 MB
in an IOPAC ILCM
DN STA F S LTA TE RESULT
Do
step 5
step 4
1-745
NT6X18
(continued)