Nortel DMS-100 Series Replacement Procedures page 988

1-956 XPM card replacement procedures
NT6X30
in an RSC LCM
25
26
27
297-8021-547 Standard 14.02 May 2001
(continued)
Switch the circuit breaker to the ON position that you switched to the OFF
position on the FSP at step 17.
If
the circuit breaker remains switched and the LED
light on the FSP goes out
the circuit breaker trips or the LED light on the FSP
does not go out
The next action depends on your reason for performing this procedure.
If you were
directed to this procedure from a maintenance proce-
dure
not directed to this procedure from a maintenance
procedure
Return to the maintenance procedure that sent you to this procedure and
continue as directed.
Do
step 26
step 38
Do
step 27
step 28