Nortel DMS-100 Series Replacement Procedures page 610

1-578 XPM card replacement procedures
NT2X90
in an RSC-S (DS-1) Model B RMM
Replacing an NT2X90 card in RSC-S RMM
At your Current Location
1
2
At the MAP terminal
3
4
297-8021-547 Standard 14.02 May 2001
Proceed only if you have been directed to this card replacement procedure
from a step in a maintenance procedure, are using the procedure for verifying
or accepting cards, or have been directed to this procedure by your
maintenance support group.
Obtain an NT2X90 replacement card. Ensure the replacement card has the
same product equipment code (PEC), including suffix, as the card that is to
be removed.
Set the MAP display to the TTP level and post the RMM by typing
>MAPCI;MTC;TRKS;TTP;POST P RMM
and pressing the Enter key.
Example of a MAP display:
CM MS IOD Net
. . .
TTP
0 Quit POST
2 Post_ TTP 6–018
3 Seize_ CKT TYPE
4 OG RMM
5 Bsy_
6 RTS_
7 Tst_
8
9 CktInfo
10 CktLoc
11 Hold
12 Next_
13 Rls_
14 Ckt_
15 Trnslvf_
16 Stksdr_
17 Pads_
18 Level_
Busy the trunk circuit on the RMM by typing
>BSY;BSY;INB;ALL
and pressing the Enter key.
Example of a MAP display:
(continued)
PM CCS LNS
. . . .
DELQ
PM NO. COM LANG STA
0 20 MLT
Trks Ext Appl
. . .
BUSYQ DIG
S R DOT TE RESULT
0 IDL