Nortel DMS-100 Series Replacement Procedures page 583

Application
Use this procedure to replace the card that follows in the shelves or frames that
appear in the table that follows.
PEC
NT2X90
For the card you replace, refer to the Index for a list of cards, shelves, and
frames if you cannot identify:
•
•
•
Use the Index documented in this maintenance manual.
Common procedures
The common replacing a card procedure is referenced in this procedure.
Action
The flowchart that follows is only a summary of the procedure. To replace the
card, use the instructions in the step-action procedure that follows.
DMS-100 Family NA100 Card Replacement Procedures Volume 4 of 7 LET0015 and up
Suffixes Cardname
AB, AC, Incoming/outgoing
AD Transmission Test
Trunk Circuit (TTT)
the PEC
the suffix
the shelf or frame
XPM card replacement procedures 1-551
in an RLCM-EDC RMM
Shelf/frame name
RMM/RLCC
NT2X90