Note:
LED blinking in EDM is representative of, but not identical to, the actual LED blinking rates on
the switch.
For more information about the LEDs and a description of the blinking rates, see the preceding LED
sections.
40GBASE-QSFP+ ports
When a 40 Gigabit port is channelized, only use break out cables (DAC or Fiber) in it. Otherwise,
the link behavior can be unpredictable because it can result in mismatched link status between link
partners, which can further lead to network issues.
Also avoid the use of break out cables in non-channelized 40 Gigabit ports because this can result
in mismatched link status between link partners, which can lead to network issues.
November 2016
Installing the Avaya VSP 8000 Series
Comments on this document? infodev@avaya.com
40GBASE-QSFP+ ports
87