Enable Rip - D-Link DI-1750 Reference Manual

6.9.2 Enable RIP

To enable RIP, use the following commands, starting in global configuration directory:
router rip
network
<network-mask>
Step1：
input router Command，it will list all arguments.
(00)beigrp
(01)bgp
(02)ospf
(03)rip
Please Input the code of command to be excute(0-3): 3 (Select rip option )
Will you excute it? (Y/N):y
Step2：
Key Word:
Q(quit)
(00)auto-summary Config automatic network number summarization
(01)chinese help message in Chinese
(02)chmem Change memory of system
(03)connect Open a outgoing connection
(04)default restore default configuration
(05)default-information Control distribution of default information
(06)default-metric Set metric of redistributed routes
(07)disconnect Discoonect an existing outgoing network connection
(08)distance Set administrative distance
(09)english help message in English
(10)exit exit / quit
(11)filter Set route filter to the networks in routing updates
(12)help Description of the interactive help system
(13)history look up history
(14)input-queue Specify input queue depth
(15)interface interface configuration
(16)neighbor Specify a neighbor router
(17)network enable RIP on an IP network
(18)no negate configuration
(19)offset Add offset for RIP routes
(21)redistribute Redistribute information from another protocol
(22)resume Resume an active outgoing network connection
(23)router routing protocol configuration
(24)show show configuration and status
(25)telnet Open a telnet connection
(26)timers Adjust routing timers
(27)validate-update-source whether to validate-update-source
(28)version Set routing protocol version
(29)where display all outgoing telnet connection
Please Input the code of command to be excute(0-29): 17 (Select network option )
Key Word:
U(undo) D(default) Q(quit)
(00)A.B.C.D Network number
Please Input the code of command to be excute(0-0):0
(00)A.B.C.D
Please Input the code of command to be excute(0-0): 0
Command
network-number
Enable BEIGRP (compatible with eigrp)
Enable Border Gateway Protocol (BGP)
Enable Open Shortest Path First (OSPF)
Enable Routing Information Protocol(RIP)
Network number
Model Name
Function
Enable a RIP routing process, which places you in
router configuration mode.
Associate a network number with a RIP
routing process.
- 203 -