D-Link DI-1750 Reference Manual page 324

Please Input the code of command to be excute(0-1): 0
input 0，Select groups option ，prompt is as below:
(00)A.B.C.D
(01)interface-name
(02)detail
(03)<cr>
Please Input the code of command to be excute(0-3):
Select parameter .
7.3.13 Example of multicast route configuration
1. Basic PIM-DM configuration
A series-17 router, a cisco 2620. Configuration is as below:
Series-17 router configure:
!
ip multicast-routing
!
interface Null0
!
interface Loopback1
ip address 1.1.1.1 255.255.255.0
no ip directed-broadcast
ip pim-dm
ip igmp static-group *
!
interface Ethernet1/1
ip address 192.167.20.132 255.255.255.0
no ip directed-broadcast
duplex half
ip pim-dm
ip igmp static-group 239.1.1.1
!
!
interface Ethernet2/1
ip address 192.168.20.132 255.255.255.0
no ip directed-broadcast
duplex half
ip pim-dm
ip pim-dm neighbor-filter nbr_filter
!
!
ip access-list standard nbr_filter
deny 192.167.20.132 255.255.255.255
permit 192.168.20.0 255.255.255.0
!
Router B
interface ethernet 1/1
ip address 192.168.20.82 255.255.255.0
interface loopback 0
ip address 20.1.1.1 255.0.0.0
!
router PIM-DM
network 192.168.20.0
network 20.0.0.0
!
cisco 2620 configure:
Model Name
IP group address
IGMPv3 source information
- 322 -