D-Link DI-1750 Reference Manual page 447

Hide thumbs Also See for DI-1750:
Table of Contents

Advertisement

Note:If selecting avtivate delay,input time here,for example 34.
Key Word:
Q(quit)
(00)<0-4294967294> Deactive Seconds
(01)never Never deactive the backup line
Please Input the code of command to be excute(0-1): 0
Note: Determine whether disactivate delay is needed or not here,for example 0.
Please input a digital number:Please input a string:23
Note:If choosing disactivate delay,input time here,for example 23.
Will you excute it? (Y/N):y
2. launch flow equilibrium backup
When the actual flow of primary interface exceeds the percent threshold,the backup interface will be
activated entering working status. However,when the ratio of the primary and backup interface actual
flow with primary interface bandwidth is lower than setting threshold,the backup interface will be
disactivated and enter backup status.
launch flow equilibrium backup,the following tasks are needed:
(1)
Select backup interface.
(2)
Launch flow equilibrium on this interface.
Select backup interface.execute commands under interface configuration.
backup interface slot/port
[DEFAULT@Router /config/]# interface
Key Word:
U(undo) D(default) Q(quit)
(00)FastEthernet
(01)Ethernet
(02)Serial
(03)Async
(04)Null
(05)Loopback
(06)Tunnel
(07)Dialer
(08)Multilink
(09)Virtual-template Virtual template interface
(10)Virtual-tunnel
Please Input the code of command to be excute(0-10): 0
Note:Input the interface needs to configure backup here,for example FastEthernet.
Please input a interface name:f0/0
Note:Input interface name here,for example f0/0.
Will you excute it? (Y/N):y
Key Word:
Q(quit)
(00)arp set arp timeout
(01)backup Modify backup parameters
(02)bandwidth Set the interface bandwidth
......
Please Input the code of command to be excute(0-35): 1 (select backup)
Key Word:
Command
FastEthernet interface
Ethernet interface
Serial interface
Asynchronous interface
Null interface
Loopback interface
Tunnel interface
Dialer interface
Multilink-group interface
Virtual tunnel interface
Model Name
select the backup interface
- 445 -
Function

Advertisement

Table of Contents
loading

This manual is also suitable for:

Di-2621Di-2630Di-3660

Table of Contents