D-Link DI-1750 Reference Manual page 146

U(undo) D(default)
......
(07)map
(08)remote-name
......
Please Input the code of command to be excute(0-11): 7
(00)A.B.C.D
Please Input the code of command to be excute(0-0): 0
Please input a IP Address:10.0.0.100 （input ip address）
(00)WORD
(01)broadcast
......
Please Input the code of command to be excute(0-5): 0
Please input a string:12345678 （input dial-string）
Will you excute it? (Y/N):y
！configuring the static route to the center ISDN PRI
Key Word:
U(undo) D(default)
......
(14)exit
(15)fair-queue
......
Please Input the code of command to be excute(0-32): 14
Will you excute it? (Y/N):y
[DEFAULT@Router /config/]#ip
......
(16)route
(17)rsvp
......
Please Input the code of command to be excute(0-20): 16
(00)A.B.C.D
(01)default
Please Input the code of command to be excute(0-1): 0
Please input a IP Address:0.0.0.0 （input dest IP address）
(00)A.B.C.D
Please Input the code of command to be excute(0-0): 0
Please input a IP Address:0.0.0.0（input dest mask）
(00)A.B.C.D
(01)interface-name
Please Input the code of command to be excute(0-1): 1
Please input a interface name:b2/0 （input interface name）
(00)<1-255>
(01)<cr>
Please Input the code of command to be excute(0-1): 1
Will you excute it? (Y/N):y
5.12 Configuring WAN performance
5.12.1 Implementation information
Fast-switch provides that the router can switch the IP packets directly to the physical port of routing
next hop without passing through the IP layer. This function can be configured on the interface which
has encapsulated PPP ,HDLC or ARP protocol.
Model Name
Q(quit)
Define multiple dial-on-demand numbers
Specify remote name
IP address
Dialer string
Broadcast to this address
Q(quit)
exit / quit
enable fair queue on interface
static route
Configure RSVP information
dest IP address
default route
dest netmask
gateway IP address
Distance metric for this route
- 144 -