D-Link DI-1750 Reference Manual page 201

(00)extended
(01)standard Standard Access List
Please Input the code of command to be excute(0-1): 1
input 1，Select standard option ，prompt is as below:
(00)WORD Standard Access-list name
Please Input the code of command to be excute(0-0): 0
input 0，Select WORD option ，prompt is as below:
Please input a string:
input the list sting.
Step2：
Key Word:
Q(quit)
(00)chinese help message in Chinese
(01)chmem Change memory of system
(02)connect Open a outgoing connection
(03)default restore default configuration
(04)deny Specify packets to reject
(05)disconnect Discoonect an existing outgoing network connection
.......
Please Input the code of command to be excute(0-18): 4 (Selectdeny option )
If you Select permit Command, you can specify one or more allowance terms.
In the prompt ，prompt is as below:
(00)any Any source host
(01)A.B.C.D Address to match
Please Input the code of command to be excute(0-1): 0
Key Word:
Q(quit)
(00)log logging packet
(01)<cr>
Please Input the code of command to be excute(0-1): 0
Key Word:
Q(quit)
(00)<cr>
Please Input the code of command to be excute(0-0): 0
Will you excute it? (Y/N):y
To create an extended access list, use one of the following commands in global configuration mode:
Command
ip access-list extended name
{deny | permit} protocol source
source-mask
destination-mask
precedence] [tos tos] [established]
[log]{deny | permit} protocol any any
Quit
Step1：
input ip Command，prompt is as below:
(00)access-list
(01)as-path
(02)community-list
......
Please Input the code of command to be excute(0-20): 0
input 0，Select access-list option ，prompt is as below:
(00)extended
Model Name
Extended Access List
Use the name to define an extended IP access list
In extended access-list configuration mode, specify one
or more conditions allowed or denied. This determines
destination
[precedence whether the packet is passed or dropped. (precedence
indicates the priority of ip packet, TOS indicates Type of
Service)
Quit the access-list configuration mode.
Named access-list
BGP as-path access list definition
Community attribute list definition
Extended Access List
Function
- 199 -