D-Link DI-1750 Reference Manual page 313

input 15，Select pim-dm option ，prompt is as below:
(00)dr-priority
(01)hello-interval
(02)state-refresh
(03)version
......
Please Input the code of command to be excute(0-5): 3
input 3，Select version option .
7.3.3 Configur Status Refresh
In management directory, the default case will allow forwarding pim dense mode to refresh control
message. Configuration command in port configure, as to first hop router directly connected with
source, is the interval of sending refresh message periodically. Here it only effects on ascending ports.
As it to back routers, it is the interval of the port allowing and processing status refresh message.
Command
ip(undo)
state-refresh disable
ip pim-dm
origination-interval
Step1：
In the parameter prompt select 17 option ，first input U or u,prompt is as below:
(00)access-group
......
(15)pim-dm
......
Please Input the code of command to be excute(0-22): 15
input 15，Select pim-dm option ，prompt is as below:
(00)dr-priority
(01)hello-interval
(02)state-refresh
(03)version
......
Please Input the code of command to be excute(0-5): 2
input 3，Select state-refresh option ,prompt is as below:
(00)origination-interval
Please Input the code of command to be excute(0-0): 0
input 0，Select origination-interval option ，prompt is as below:
(00)<4-100>
(01)<cr>
Please Input the code of command to be excute(0-1):
Select parameter .
7.3.4 Configure filter list
In default case PIM-DM has no filter lists. They are all configured in port configuration, including
neighbour filter list and multicast bound filter list.
If you want to forbid a router or a network segment from adding in PIM-DM negotiation, you are
required to configure neighbour filter list. To forbid or allow some groups passing this region, you
should configure bound group filter list.
Command
ip pim-dm neighor-filter
ip multicast boundary
PIM-DM router DR priority
PIM-DM router send hello interval
PIM-DM State-Refresh configuration
PIM-DM version
Enable sending and receiving status refresh
pim-dm
messages on the port.
The interval of sending or receiving status
state-refresh
refresh messages on the port.
Specify access control for packets
PIM-DM interface commands
PIM-DM router DR priority
PIM-DM router send hello interval
PIM-DM State-Refresh configuration
PIM-DM version
PIM-DM State-Refresh origination interval
interval in seconds
Configure neighbor filter list.
Configure group filter list.
Model Name
Purpose
Purpose
- 311 -