D-Link DI-1750 Reference Manual page 186

(01)disable
(02)pool
(03)ping
(04)write-time
Please Input the code of command to be excute(0-4): 0
input 0，Selectenable option .
6.5.2 Disable DHCP Server service
To disable DHCP Server service and stop allocating parameters like IP for DHCP Client, please
execute the following command:
Command
ip dhcpd disable
input ip Command，prompt is as below:
(00)access-list
......
(05)dhcpd
......
Please Input the code of command to be excute(0-20): 5
input 5，Select dhcpd option ，prompt is as below:
(00)enable
(01)disable
(02)pool
(03)ping
(04)write-time
Please Input the code of command to be excute(0-4): 1
input 0，Select disable option .
6.5.3 Configure ICMP Inspect Parameters
You can adjust the parameters sent by ICMP messages as the server processing address inspecting
according to your demands:
To specify the amount of ICMP messages sent out, please execute the following command in global
configure directory:
Command
ip dhcpd ping packets pkgs
To configure the timeout waiting for ICMP message, please execute the following command in global
configure directory:
Command
ip dhcpd
timeout
input ip Command，prompt is as below:
(00)access-list
......
(05)dhcpd
......
Please Input the code of command to be excute(0-20): 5
input 5，Select dhcpd option ，prompt is as below:
(00)enable
(01)disable
Disable DHCP Service
Configure DHCP address pools
Specify icmp parameters used by DHCP
Specify icmp parameters used by DHCP
Disable DHCP Server service.
Named access-list
Specify server parameter
Enable DHCP Serveice
Disable DHCP Service
Configure DHCP address pools
Specify icmp parameters used by DHCP
Specify icmp parameters used by DHCP
Specify the amount of ICMP messages sent out as processing
address inspecting.
Specify the timeout for waiting ICMP corresponding.
ping timeout
Named access-list
Specify server parameter
Enable DHCP Serveice
Disable DHCP Service
Model Name
Function
Function
Function
- 184 -