D-Link DI-1750 Reference Manual page 333

Input show command, clew：
......
(18)ip
......
Please Input the code of command to be excute(0-46): 18
Input 18，choose ip option，clew：
(14)mroute
......
Please Input the code of command to be excute(0-29): 14
Input 14，choose mroute option，clew：
(00)dvmrp
......
Please Input the code of command to be excute(0-5): 0
Input 0，choose dvmrp option，clew：
(00)A.B.C.D
(01)interface-name
(02)<cr>
Please Input the code of command to be execute(0-2): 2
Input 2，choose <cr> option.
7.5.8 Clear (S, G) information
Under normal condition, the user may need to clear the (S.G) item in local MRT or the totaled number
of multicast message forwarded through (S.G) entry. Use the following commands under configure
mode:
clear ip mroute dvmrp { * |
source-address [group-address] }
Input clear command, clew：
(00)arp-cache
(01)dialer
(02)frame-relay-inarp
(03)ip
......
Please Input the code of command to be excute(0-12): 3
Input 3，choose ip option，clew：
......
(05)mroute
......
Please Input the code of command to be excute(0-9): 5
Input 5，choose mroute option，clew：
(00)dvmrp
(01)olnk
(02)pim-dm
(03)pim-sm
Please Input the code of command to be excute(0-3): 0
Input 0，choose dvmrp option，clew：
(00)*
(01)A.B.C.D
IP Configuration information
IP multicast routing table
distance vector multicast-routing protocol.
source address
Command
Clear the entire ARP cache
Clear dialer statistics
Clear inverse ARP entries from the map table
IP
Delete multicast routing table entries
distance vector multicast-routing protocol.
clear OLNK MRT
Clear PIM-DM Route(only for iif owner)
PIM Sparse mode
clear all multicast routes
source address
Model Name
......
Function
Clear the (S.G) entry in the local MRT, this operation will
delete all or part of the items in local multicast routing list, and
may influence normal forward of multicast message, this
command can only delete (S.G) entry which upstream
interface is created by DVMRP multicast routing protocol.
- 331 -