D-Link DI-1750 Reference Manual page 515

Will you execute it? [Y]:
15.1.9 reconfirm LNS and Client
After establishing session successfully and LNS authenticating instead of LAC,LNS and CLIENT can
reconfirm, relative command as follows:
Force-local-chap
Force-local-chap
The example below creates a VPDN group and sets it as NS and sets the re-authentication. First enter
the vpdn-group 1 with command "vpdn-group 1"(see the example of command vpdn-group) then
configure as NS with command "accept-dialin" (see the example of command accept-dialin) . Then,
configure the "force -local-chap" just as below.
Current Status:vpdn Current Directory: config
Key Word:
Q(quit)
(00)accept_dialin VPDN accept-dialin group configuration
(01)chmem Change memory of system
(02)controller controller configuration
(03)domain Initiate a tunnel based on domain name
(04)exit exit / quit
(05)force-local-chap Force a CHAP challenge to be instigated locally
(06)help Description of the interactive help system
(07)hotkey ctrl+\ :print system information , ctrl+] :reb
oot
(08)initiate-to Initiate tunnel to remote peer
(09)interface interface configuration
...................
(23)vlan Vlan commands
Please Input the code of command to be execute(0-23):5
15.1.10 LCP renegotiate LNS and CLIENT
After session establish successfully, LNS can renegotiate the whole PPP protocol with CLIENT.
Relative command as below:
lcp-renegotiation
lcp-renegotiation (undo)
The example below creates a VPDN group and sets it as NS and restarts LCP negotiation.
First enter the vpdn-group 1, then configure as NS with command "accept-dialin" (see the example of
accept-dialin)and bind the VPDN group with L2tp protocol with command "protocol l2tp"(see the
example of protocol). Then, configure the "lcp-renegotiation" just as below
Current Status:vpdn Current Directory: config
Key Word:
Q(quit)
(00)accept_dialin VPDN accept-dialin group configuration
(01)chmem Change memory of system
(02)controller controller configuration
(03)domain Initiate a tunnel based on domain name
(04)exit exit / quit
Model Name
Command
Command
- 513 -
Function
Reconfirm LNS and Client.
Cancle Reconfirm LNS and Client.
Function
LCP renegotiate LNS and Client.
Disable renegotiate LNS and Client.