D-Link DI-1750 Reference Manual page 397

(00)<1-16> Queue list number
Please Input the code of command to be excute(0-0): 0
Please input a digital number:2
Key Word:
Q(quit)
(00)interface Establish priorities for packets from a named interface
(01)protocol Establish priorities for packets of a protocol
(02)queue configure parameters for a particular queue
(03)default set custom queue for unspecified packets
Please Input the code of command to be excute(0-3): 1
Input 1 and select the<protocol> option
Key Word:
Q(quit)
(00)ip internet protocol
(01)arp Address Resolution Protocol
(02)comp_tcp Compressed Tcp
Please Input the code of command to be excute(0-2): 0
Key Word:
Q(quit)
(00)<0-16> Queue number
Please Input the code of command to be excute(0-0): 0
Please input a digital number:2
Key Word:
Q(quit)
(00)gt Classify packets greater than a specified length
(01)lt Classify packets less than a specified length
(02)fragments Prioritize fragmented IP packets
(03)list to specify an access list
(04)tcp Prioritize TCP packets 'to' or 'from' the specified port
(05)udp Prioritize UDP packets 'to' or 'from' the specified port
(06)<cr>
Please Input the code of command to be excute(0-6): 0
You can select different keyword at different needs.
Key Word:
Q(quit)
(00)<0-65535> packet length(include MAC encapsulation)
Please Input the code of command to be excute(0-0): 0
Please input a digital number:20
Note：Input the size of <0-65535> packet, here 20 is only for example
Will you excute it? (Y/N):y
queue-list list-number interface interface-type
interface-number queue-number
To establish a customed queue by the protocol medols, you can input :queue-list in the global
configuration directory
[DEFAULT@router /config/]#queue-list
Key Word:
U(undo) D(default) Q(quit)
(00)<1-16> Queue list number
Please Input the code of command to be excute(0-0): 0
Please input a digital number:2
Note：Input 1-16 queue numbers here, 2 is only for example
Key Word:
Q(quit)
(00)interface Establish priorities for packets from a named interface
Model Name
Command
- 395 -
Purpose
Establish CQ by a input packet from some specified
interface