D-Link DI-1750 Reference Manual page 188

(00)enable
(01)disable
(02)pool
(03)ping
(04)write-time
Please Input the code of command to be excute(0-4): 2
input 2，Select pool option and add DHCP Server address pool.
6.5.6 Configure parameters of DHCP Server address pool
In configure of DHCP address pool, you can execute the following commands to configure concerned
parameters.
You can use the following command to configure the network address used for automatic allocation:
Command
network ip-addr netsubnet
You can use this command to configure the address range used for automatic allocation:
Command
range low-addr high-addr
You can use this command to configure the default route allocated for client:
Command
default-router ip-addr ...
You can use this command to configure the DNS server address assigned for client:
Command
dns-server ip-addr ...
You can use this command to configure the domain name assigned for client:
Command
domain-name name
You can use this command to configure the lease time of address assigned for client:
Command
lease
[hours][minutes]
infinite }
You can use this command to configure the netbios-name-server address assigned for client:
Command
netbios-name-server
ip-addr...
You can use this command to configure the host address of address pool for manual allocation:
Command
host ip-addr netmask
Enable DHCP Serveice
Disable DHCP Service
Configure DHCP address pools
Specify icmp parameters used by DHCP
Specify icmp parameters used by DHCP
Configure the network address used for automatic allocation.
Configure the address range used for automatic allocation.
Configure the default route allocated for client host.
Configure the DNS server address assigned for client.
Configure the domain name assigned for client.
{days Configure the lease time of address assigned for client.
|
Configure the netbios-name-server address assigned for client.
Configure the host address of address pool for manual
allocation.
Model Name
Function
Function
Function
Function
Function
Function
Function
Function
- 186 -