D-Link DI-1750 Reference Manual page 452

standby [group-number] timers hello-timer hold-timers
standby (undo) [group-number] timers
You should input command standby in interface configure model , and it will show all the arguments:
(00) arp
......
(34) standby
......
Please Input the code of command to be excute(0-35): 34
Input 34，select domain, it will hint：
U(undo) D(default) Q(quit)
(00)<0-255>
......
(07)timers
......
Please Input the code of command to be excute(0-0): 7 , it will hint
Key Word:
Q(quit)
(00)<1-254>
(01)<cr>
Please Input the code of command to be execute(0-1):
Input 1, standby group will use the default hello timer and hold timer
Input 0, it will hint :
Please input a digital number:
You can input a hello timer here, and it will hint
Q(quit)
(00)<3-255>
(01)<cr>
Please Input the code of command to be execute(0-1):
Input 1, standby group will use the default hold timer( 3*hello timer) .
Input 0, it will hint
Please input a digital number:
You can input a hold timer here.
2. Config Standby Group Virtual Mac Address
In congure use the following command：
standby
mac-address
standby (undo) [group-number] mac-address
You should input command standby in interface configure model , and it will show all the arguments:
(00) arp
......
(34) standby
......
Please Input the code of command to be excute(0-35): 34
Input 34，select domain, it will hint：
U(undo) D(default) Q(quit)
(00)<0-255>
......
(02)mac-address
......
Please Input the code of command to be excute(0-2): 2 , it will hint
set arp timeout
HSRP configuration commands
HSRP Group ID
Config HSRP group timer
hello timer (s)
hold timer (s)
Command
[group-number]
mac-address
set arp timeout
HSRP configuration commands
HSRP Group ID
Config HSRP group mac address
Model Name
Purpose
Set standby group virtual mac address.
Use default sandby group virtual mac
address.
- 450 -
Configure standby timer.
Use default timer.