D-Link DI-1750 Reference Manual page 533

(36)spanning-tree
(37)speed
(38)standby
(39)switchport
(41)vrrp
Please Input the code of command to be execute(0-41): 36
Current Status:f1/0
Key Word:
U(undo) Q(quit)
(00)vlan
(01)sstp
(02)cost
(03)port-priority
(04)bpdufilter
(05)bpduguard
(06)portfast
(07)guard
Please Input the code of command to be execute(0-7): 0
Current Status:f1/0
Key Word:
Q(quit)
(00)WORD VLAN IDs such as (1,3,5,7) Or (1,3-5,7) Or (1-7)
Please Input the code of command to be execute(0-0): 0
Please input a string:200
Current Status:f1/0
Key Word:
Q(quit)
(00)cost
(01)port-priority
Please Input the code of command to be execute(0-1): 0
Current Status:f1/0
Key Word:
Q(quit)
(00)<1-200000000> interface mode vlan cost value
Please Input the code of command to be execute(0-0): 0
Please input a digital number:24
Will you execute it? [Y]:
16.1.9 Configure the Port Priority for Spanning Tree
When a loop appears, spanning tree will change the port status to "Blocking" to disconnect the loop.
Users may control port blocking by configuring port privilege and port path xxx of the Spanning Tree.
Use the following commands to configure port privilege for spanning tree:
Command
spanning-tree [sstp | vlan
vlan-id] port-priority value
spanning-tree undo [sstp |
vlan vlan-id] port-priority
The following commands configure interface f1/0 priority to 24.
Current Status:f1/0
Key Word:
Q(quit)
(00)arp
(01)backup
......
Model Name
Config spanning-tree protocol on port
Configure speed operation
HSRP configuration commands
Set port switching characteristics
VRRP configuration commands
Current Directory: config
Setup spanning-tree protocol interface vlan function
Setup spanning-tree protocol interface sstp function
Setup spanning-tree protocol port cost
Setup spanning-tree protocol port priority
Setup spanning-tree protocol bpdufilter function
Setup spanning-tree protocol bpduguard function
Setup spanning-tree protocol portfast function
Setup spanning-tree protocol guard function
Current Directory: config
Current Directory: config
Setup spanning-tree protocol port cost
Setup spanning-tree protocol port priority
Current Directory: config
Configure Path Value for Ports.
Cancle Path Value for Ports.
Current Directory: config
set arp timeout
Modify backup parameters
Function
- 531 -