D-Link DI-1750 Reference Manual page 160

nat
Input 13, select option，prompt is as below:
(00)inside Inside address translation
(01)log NAT Logging
(02)outside Outside address translation
......
Please Input the code of command to be excute(0-4):
inside
Input 0, select option，prompt is as below:
(00)source Source address translation
(01)destination Destination address translation
Please Input the code of command to be excute(0-1):
source
Input 0, select option，prompt is as below:
(00)list Specify access list describing local addresses
(01)static Specify static local->global mapping
Please Input the code of command to be excute(0-1):
static
Input 1, select option，prompt is as below:
(00)A.B.C.D Inside local IP address
(01)network Subnet translation
(02)tcp Transmission Control Protocol
(03)udp User Datagram Protocol
Please Input the code of command to be excute(0-3): 0
Input 0, select A.B.C.D option，prompt is as below:
Please input a IP Address:
Input local-ip, prompt is as below:
(00)A.B.C.D Inside Global IP address
Please Input the code of command to be excute(0-0): 0
Input 0, select A.B.C.D option，prompt is as below:
Please input a IP Address:
Input global-ip.
Step 2：
Input interface command, prompt is as below:
(00)FastEthernet FastEthernet interface
(01)Ethernet Ethernet interface
(02)Serial Serial interface
......
Please Input the code of command to be excute(0-10):
Specify the inside interface type and number.
Step 3：
Select 18 option in the prompt, it will list all arguments:
(00)access-group
......
(09)nat NAT interface commands
......
Please Input the code of command to be excute(0-18): 9
Input 9, select nat option, prompt is as below:
(00)inside Inside interface for address translation
(01)outside Outside interface for address translation
Please Input the code of command to be excute(0-1): 0
Input 0, select inside option, it will sign the interface to be connected with inside network.
Step 4：
Input command interface in global configure directory, prompt is as below:
(00)FastEthernet FastEthernet interface
(01)Ethernet Ethernet interface
(02)Serial Serial interface
Model Name
Specify access control for packets
- 158 -
0
0
1