D-Link DI-1750 Reference Manual page 115

dialer-group group-number
ppp
[pap|chap|ms-chap]
ppp multi-link
For example:
[DEFAULT@Router /b2/0/]#interface
......
(04)BRI
(05)Null
......
Please Input the code of command to be excute(0-11): 4
Please input a interface name:bri 2/0 （input the interface name，here is just an example）
Will you excute it? (Y/N):y
Key Word:
Q(quit)
......
(18)interface
(19)ip
......
Please Input the code of command to be excute(0-32): 19
Key Word:
U(undo) D(default)
(00)access-group
(01)address
......
Please Input the code of command to be excute(0-18): 1
(00)A.B.C.D
(01)negotiated
Please Input the code of command to be excute(0-1): 0
Please input a IP Address:192.168.0.1 255.255.255.0 （input ip address，this is just an example）
(00)secondary
(01)<cr>
Please Input the code of command to be excute(0-1): 1
Will you excute it? (Y/N):y
Key Word:
U(undo) D(default)
......
(11)dialer-group
(12)encapsulation
......
Please Input the code of command to be excute(0-32): 12
Key Word:
U(undo) D(default)
(00)ppp
Please Input the code of command to be excute(0-0): 0
Will you excute it? (Y/N):y
Key Word:
U(undo) D(default)
......
(09)description
(10)dialer
......
Please Input the code of command to be excute(0-32): 10
Key Word:
U(undo) D(default)
Model Name
Controls access to this interface by adding it to a
dialer access group.
(Optional) Enables PPP authentication.
authentication
Enable Multilink PPP.
ISDN Basic Rate Interface
Null interface
interface configuration
IP configuration commands
Q(quit)
Specify access control for packets
IP address
IP address
IP address negotiated over PPP or via DHCP
Make this IP address a secondary address
Q(quit)
Assign interface to dialer-list
Set encapsulation type for an interface
Q(quit)
PPP Protocol
Q(quit)
Set the interface description
Dial-on-demand routing (DDR) commands
Q(quit)
- 113 -