D-Link DI-1750 Reference Manual page 512

(11)lcp-renegotiation force LCP negotiate locally
(12)local-name Local name used for group authentication
(13)pptp PPTP specific commands
(14)protocol Tunneling protocol to be used
(16)request-dialin VPDN request-dialin group configuration
(17)router routing protocol configuration
(19)set_e1_threshold SET E1 THRESHOLD
(20)show show configuration and status
(21)terminate-from Terminate tunnel from remote peer
(22)virtual-template Virtual template to clone from
(23)vlan Vlan commands
Please Input the code of command to be execute(0-23): 08
Current Status:vpdn Current Directory: config
Key Word:
U(undo) Q(quit)
(00)host-name Host DNS Name
(01)ip IP Address
Please Input the code of command to be execute(0-1): 01
Current Status:vpdn Current Directory: config
Key Word:
Q(quit)
(00)<A.B.C.D> Endpoint's IP address
Please Input the code of command to be execute(0-0): 0
Please input an IP Address Parameter:192.168.20.200
Current Status:vpdn Current Directory: config
Key Word:
Q(quit)
(00)priority Priority group
Please Input the code of command to be execute(0-0): 0
Current Status:vpdn Current Directory: config
Key Word:
Q(quit)
(00)<0--4> priority number
Please Input the code of command to be execute(0-0): 0
Please input a digital number:0
Will you execute it? [Y]:y
You can Repeat the process and configure other 4 "initiate-to ip "command.
15.1.7 Set VPDN group local tunnel name
When LAC sends SCCRQ, the local tunnel name will be sent together, thus LNS will find local VDPN
group based on the remote tunnel name, the local tunnel name can include 244 bytes character string
at least, relative command as follows:
Localname local name
Local-name(undo) local_name
The example below creates a VPDN group and sets it as NAC and configures the name of local tunnel
as lac. First enter the vpdn-group 1 with command "vpdn-group 1"(see the example of vpdn_group),
then configure as NAC with command "request-dialin"(see the example of request_dialin). Then,
configure the "local-name nac" just as below.
Current Status:vpdn Current Directory: config
Key Word:
Q(quit)
(00)accept_dialin VPDN accept-dialin group configuration
(01)chmem Change memory of system
Command
Model Name
Function
Set VPDN group local tunnel name.
Cancle VPDN group local tunnel name.
- 510 -