D-Link DI-1750 Reference Manual page 403

[DEFAULT@Router /config/]#priority-list
Key Word:
U(undo) D(default) Q(quit)
(00)<1-16> priority list number
Please Input the code of command to be excute(0-0): 0
Input0，select<1-16>option，it will prompt to input the PQ number：
Please input a digital number:1
Note： Input 1-16 priority list number of 1-16, 1 is only for example.
Key Word:
Q(quit)
(00)interface
(01)protocol
(02)queue-limit set queue limit for priority queue
(03)default
Please Input the code of command to be excute(0-3): 3
Input 3，select <default> option:
Key Word:
Q(quit)
(00)high
(01)middle
(02)normal
(03)low
Please Input the code of command to be excute(0-3): 1
Note：Input priority level of the queue, 1 is here ony for example.
Will you excute it? (Y/N):y
9.2.11 QoS Display
1. Display The Interface Queues Information
In command to display the information of the interface queues, you can use the command below:
Command
show queue interface-type
interface-number
[DEFAULT@Router /config/]#show
Key Word:
U(undo) D(default) Q(quit)
(00)alias alias for command
(01)arp ARP table
(02)backup
(03)board-info Board information
(04)break router breakpoint information
(05)
(06)class-map show class-map configuration
(07)configuration show configuration in flash memory
(08)controller Interface controller status
(09)cpu cpu usage information
(10)debug State of each debugging option
(11)dhcp DHCP information
(12)dialer Dialer parameters and statistics
(13)frame-relay Display Frame Relay state
(14)frswitch Display Frame Relay switch state
(15)hdlc HDLC parameters and statistics
(16)hosts Host table
(17)interface interface status and configuration
Establish priorities for packets from a named interface
Establish priorities for packets of a protocol
set custom queue for unspecified packets
Displaying the information of the interface queues.
Bakup status
Model Name
Purpose
- 401 -