D-Link DI-1750 Reference Manual page 162

Please Input the code of command to be excute(0-0): 0
Input 0，select WORD option，prompt is as below:
Please input a string:
Input pool name, prompt is as below:
(00)A.B.C.D Start IP address
Please Input the code of command to be excute(0-0): 0
Input 0，select A.B.C.D option，prompt is as below:
Please input a IP Address:
Input start ip address，prompt is as below:
(00)A.B.C.D End IP address
Please Input the code of command to be excute(0-0): 0
Input 0，select A.B.C.D option，prompt is as below:
Please input a IP Address:
Input end ip address，prompt is as below:
(00)A.B.C.D Network mask
Please Input the code of command to be excute(0-0): 0
Input 0，select A.B.C.D option，prompt is as below:
Please input a IP Address:
Input netmask.
Step 2：
Input ip command，it will list all arguments:
(00)access-list Named access-list
(01)as-path BGP as-path access list definition
(02)community-list
......
Please Input the code of command to be excute(0-20): 0
Input 0，select access-list option，prompt is as below:
(00)extended
(01)standard Standard Access List
Please Input the code of command to be excute(0-1): 1
Input 1，select standard option，prompt is as below:
(00)WORD Standard Access-list name
Please Input the code of command to be excute(0-0): 0
Input 0，select WORD option，prompt is as below:
Please input a string:
Input access-list-name.
Step 3：
Input ip command，it will list all arguments:
(00)access-list Named access-list
......
(13)nat NAT configuration commands
......
Please Input the code of command to be excute(0-20): 13
Input 13, select nat option，prompt is as below:
(00)inside Inside address translation
(01)log NAT Logging
(02)outside Outside address translation
(03)pool Define pool of addresses
(04)translation NAT translation entry configuration
Please Input the code of command to be excute(0-4): 0
Input 0，select inside option，prompt is as below:
(00)source Source address translation
Model Name
Community attribute list definition
Extended Access List
- 160 -