D-Link DI-1750 Reference Manual page 135

Hide thumbs Also See for DI-1750:
Table of Contents

Advertisement

5.11.5 Configuring IP address of ISDN BRI or invoking address negotiation
For BRI interface ,All configuration will be processing in D channel interface, such as brixx/xx interface.
Interface address may acquisition by PPP negotiation,or set interface IP address by command.
ip address negotiated
ip address ip address
[DEFAULT@lns /config/]#interface
Key Word:
U(undo) D(default) Q(quit)
(00)FastEthernet
(01)Ethernet
(02)Serial
(03)Async
(04)BRI
(05)Null
(06)Loopback
(07)Tunnel
(08)Dialer
(09)Multilink
(10)Virtual-template Virtual template interface
(11)Virtual-tunnel
(12)Vlan-intf
Please Input the code of command to be execute(0-11): 4
Please input slot/port:3/2
Will you execute it? [Y]:
Current Status:b3/2
Key Word:
Q(quit)
(00)backup
(01)bandwidth
(02)chmem
(03)clear_drv
(04)controller
(05)crypto
(06)custom-queue-list
(08)delay
(09)description
(10)dialer
(11)dialer-group
(12)dlc-compress
(13)encapsulation
(14)exit
(15)fair-queue
(16)help
(17)interface
(18)ip
(19)mtu
(20)pdp
(21)peer
(22)ppp
(23)priority-group
(25)random-detect
(26)router
(28)service-policy
Command
FastEthernet interface
Ethernet interface
Serial interface
Asynchronous interface
ISDN Basic Rate Interface
Null interface
Loopback interface
Tunnel interface
Dialer interface
Multilink-group interface
Virtual tunnel interface
Virtual LAN interface
Current Directory: config
Modify backup parameters
Set the interface bandwidth
Change memory of system
clear interface statistic counter
controller configuration
Configure encryption module
Assign a custom queue list to interface
Set the interface delay
Set the interface description
Dial-on-demand routing (DDR) commands
Assign interface to dialer-list
set compress protocol
Set encapsulation type for an interface
exit / quit
enable fair queue on interface
Description of the interactive help system
interface configuration
IP configuration commands
Set the interface MTU
pdp configuration commands
Peer parameters for point to point interfaces
Point-to-point protocol
Assign a priority group to interface
enable weighted random early detect on interfac
e
routing protocol configuration
Assign a priority group to interface
Model Name
Function
getting IP address of port by DHCP or PPP negotiation.
Seting IP address of port.
- 133 -

Advertisement

Table of Contents
loading

This manual is also suitable for:

Di-2621Di-2630Di-3660

Table of Contents