D-Link DI-1750 Reference Manual page 129

pppoe-server virtual-template
virtual-template-number
[DEFAULT@lns /config/]#int
Key Word:
U(undo) D(default) Q(quit)
(00)FastEthernet FastEthernet interface
(01)Ethernet Ethernet interface
(02)Serial Serial interface
(03)Async Asynchronous interface
(04)Null Null interface
(05)Loopback Loopback interface
(06)Tunnel Tunnel interface
(07)Dialer Dialer interface
(08)Multilink Multilink-group interface
(09)Virtual-template Virtual template interface
(10)Virtual-tunnel Virtual tunnel interface
(11)Vlan-intf Virtual LAN interface
Please Input the code of command to be execute(0-11): 1
Please input slot/port:4/2
Will you execute it? [Y]:
Current Status:e4/2 Current Directory: config
Key Word:
Q(quit)
(00)arp set arp timeout
(01)backup Modify backup parameters
(02)bandwidth Set the interface bandwidth
(03)bridge-group Transparent bridging interface parameters
(05)chmem Change memory of system
(06)clear_drv clear interface statistic counter
(07)controller controller configuration
(08)crypto Configure encryption module
(09)custom-queue-list Assign a custom queue list to interface
(10)delay Set the interface delay
(11)description Set the interface description
(12)duplex Configure duplex operational mode
(13)exit exit / quit
(14)fair-queue enable fair queue on interface
(15)help Description of the interactive help system
(16)interface interface configuration
(17)ip IP configuration commands
(18)keepalive Enable keepalive
(19)llc2 Setup LLC2(Logic Link Control Type2) parameters
(20)pdp pdp configuration commands
(21)pppoe-client pppoe client enable
(22)pppoe-server pppoe server enable
(23)priority-group Assign a priority group to interface
(25)random-detect enable weighted random early detect on interfac
e
(26)rate-limit rate limit
(27)rmon Configure Remote Monitoring on an interface
(28)router routing protocol configuration
(30)service-policy Assign a priority group to interface
(31)set_e1_threshold SET E1 THRESHOLD
(32)show show configuration and status
(33)shutdown Shutdown the current interface
(34)snmp Modify SNMP interface parameters
(35)spanning-tree Config spanning-tree protocol on port
(36)standby HSRP configuration commands
Model Name
Config ether interface with pppoe server, and associate with
the virtual-template interface existed.
- 127 -