D-Link DI-1750 Reference Manual page 454

......
(04)preempt
......
Please Input the code of command to be excute(0-7): 4 , it will hint
Q(quit)
(00)delay
(01)<cr>
Please Input the code of command to be execute(0-1):):
Input 1, it will set standby group preempt model without dealy
Input 0, it will hint :
Key Word:
Q(quit)
(00)<0-255>
Please Input the code of command to be execute(0-0):
You can input a delay timer here .
5. Config Standby Group Track Interface
In congure use the following command：
Command
[group-number]
Standby
interface-name decrement
Standby[undo][group-number] track interface
interface-name decrement
You should input command standby in interface configure model , and it will show all the arguments:
(00) arp
......
(34) standby
......
Please Input the code of command to be excute(0-35): 34
Input 34，select domain, it will hint：
U(undo) D(default) Q(quit)
(00)<0-255>
......
(05)track
......
Please Input the code of command to be excute(0-7): 5 , it will hint
Key Word:
Q(quit)
(00)interface
Please Input the code of command to be execute(0-0):
Input 0, you can select a track interface here and it will hint :
Key Word:
Q(quit)
(00)<1-255>
Please Input the code of command to be execute(0-0):
You can input a track interface decrement value here .
6. Configure Standby Group Authentication String
standby [group-number] authentication authen-string
standby (undo )[group-number] authentication
Model Name
Config HSRP group preempt
HSRP Group preempt delay time (s)
Wait before preempting(s)
Set standby group track interface.
track interface
Delete standby group track interface.
set arp timeout
HSRP configuration commands
HSRP Group ID
Config HSRP group priority track
track interface name
preempting decrement
Command
Purpose
Purpose
Set a authen-string
Use default authen-string
- 452 -