Ospf Configuration Examples - D-Link DI-1750 Reference Manual

To display various routing statistics, use the following commands:
show ip ospf [process-id]
show ip
[router|network|summary|asbr-summary|external|
database-summary]][link-state-id ][self-originate]
show ip ospf border-routers
show ip ospf interface
show ip ospf neighbor
debug ip ospf adj
debug ip ospf events
debug ip ospf flood
debug ip ospf lsa-generation
debug ip ospf packet
debug ip ospf retransmission
debug ip ospf spf [intra| external]
debug ip ospf tree

6.11.17 OSPF Configuration Examples

1. OSPF Point-to-Multipoint Example
BEIJING uses DLCI 201 to communicate with SHANGHAI, DLCI 202 to CHONGQING, and DLCI 203
to GUANGZHOU. SHANGHAI uses DLCI 101 to communicate with BEIJING and DLCI 102 to
communicate with GUANGZHOU. GUANGZHOU communicates with SHANGHAI (DLCI 401) and
BEIJING (DLCI 402). CHONGQING communicates with BEIJING (DLCI 301).
BEIJING Configuration:
Hostname Beijing
!
Model Name
Command
[database
ospf process-id
Display the general information about
OSPF routing process.
Display the related information about
OSPF database.
Display the internal routing table entry of
ABR and ASBR.
Display the information about OSPF
interface.
Display the OSPF neighbor information
according to the interface.
Supervise the adjacency establishment of
OSPF.
Supervise the interface and neighbour
events of OSPF.
Supervise the flooding process of OSPF
database.
Supervise the LSA generation of OSPF.
Supervise the message of OSPF.
Supervise the message retransmission
process of OSPF.
Supervise the SPF calculation route of
OSPF.
Supervise the establishment of SPF tree of
OSPF
- 238 -
Purpose