D-Link DI-1750 Reference Manual page 189

You can use this command to configure the hardware address used for matching client:
Command
hardware-address
hardware-address{ type}
You can use this command to configure the client ID used for matching client:
Command
client-identifier unique-identifier
You can use this command to configure the host name used for manual allocating to client:
Command
client-name name
Take the first command for an example.：
In the prompt Select 17 option ，prompt is as below:
(00)A.B.C.D Network number
Please Input the code of command to be excute(0-0): 0
input 0，SelectA.B.C.D option ，prompt is as below:
Please input a IP Address:
input IP.
Monitor DHCP Server
To examine the information of current address allocating information of the DHCP Server, please
execute the following commands in management directory:
Command
show ip dhcpd binding
To examine current packet statistics of the DHCP Server, please execute the following command in
management directory:
Command
show ip dhcpd statistic
Input show Command，prompt is as below:
(00)alias alias for command
......
(18)ip IP information
......
Please Input the code of command to be excute(0-45): 18
input 18，Selectip option ，prompt is as below:
(00)access-lists
......
(06)dhcpd
......
Please Input the code of command to be excute(0-20): 6
input 6，Selectdhcpd option ，prompt is as below:
(00)binding
(01)statistic
Please Input the code of command to be excute(0-1):
Select 0， display current address allocation of the DHCP Server.
Model Name
Configure the hardware address used for matching client.
Configure the client ID used for matching client.
Configure the host name used for manual allocating to
client.
Display current address allocating information of the
DHCP Server.
Display current statistics of the DHCP Server.
List IP access lists
DHCP Server information
DHCP address bindings
DHCP server statistics
- 187 -
Function
Function
Function
Function
Function