D-Link DI-1750 Reference Manual page 535

Key Word:
Q(quit)
(00)cost
(01)port-priority
Please Input the code of command to be execute(0-1): 1
Current Status:f1/0
Key Word:
Q(quit)
(00)<0-255> interface port priority value
Please Input the code of command to be execute(0-0): 0
Please input a digital number:24
Will you execute it? [Y]:
16.1.10 Configure the backbonefast for Spanning Tree
Configuring backbonefast enables the backbonefast function for spanning tree.This configuration is just
for PVST.
Use the following commands to configure backbonefast for spanning tree:
Command
spanning-tree backbonefast
spanning-tree
backbonefast
The following commands will enable backbonefast special function.
[DEFAULT@lns /config/]#sp
Key Word:
U(undo) Q(quit)
(00)mode
(01)vlan
(02)sstp
(03)backbonefast
(04)uplinkfast
(05)portfast
(06)loopguard
Please Input the code of command to be execute(0-6): 3
Will you execute it? [Y]:
[DEFAULT@lns /config/]#
16.1.11 Configure the uplinkfast for Spanning Tree
Configuring uplinkfast enables the uplinkfast fuction for spanning tree.
Use the following commands to configure uplinkfast for spanning tree:
Command
spanning-tree uplinkfast
spanning-tree
uplinkfast
The following commands will enable backbonefast special function.
[DEFAULT@lns /config/]#sp
Key Word:
U(undo) Q(quit)
(00)mode
(01)vlan
Model Name
Setup spanning-tree protocol port cost
Setup spanning-tree protocol port priority
Current Directory: config
Configure Path Value for Ports. Configure the backbonefast
feature.
Cancle Path Value for Ports.
undo
Setup spanning-tree protocol mode
Setup spanning-tree protocol on vlans
Setup spanning-tree protocol on sstp mode
Setup spanning-tree protocol backbonefast function
Setup spanning-tree protocol uplinkfast function
Setup spanning-tree protocol portfast function
Setup spanning-tree protocol loopguard function
Configure the uplinkfast feature.
Cancle the uplinkfast feature.
undo
Setup spanning-tree protocol mode
Setup spanning-tree protocol on vlans
Function
Function
- 533 -