D-Link DI-1750 Reference Manual page 406

(19)job Job parameters and statistics
(20)l2tp L2TP information
(21)line TTY line information
(22)llc LLC2 parameters and statistics
(23)logging Show the contents of logging buffers
(24)memory memory info
(25)pdp pdp State information
(26)policy-map show policy-map configuration
(27)ppp PPP parameters and statistics
(28)queue show queue contents
(29)queueing show queueing configuration
--More--
29
Input 29 ，select queueing option
Key Word:
Q(quit)
(00)custom
(01)priority priority queue list configuration
Please Input the code of command to be excute(0-1):0
Input 0，select <custom> option：
Will you excute it? (Y/N):y
The screen will display configuration like the following lines:
Current custom queue list configuration :
List Queue Args
4. Display the class-map configuration
In command to display the class-map configuration, you can use the command below:
Command
show
[class-name]
[DEFAULT@Router /config/]#show
Key Word:
U(undo) D(default) Q(quit)
(00)alias alias for command
(01)arp ARP table
(02)backup
(03)board-info Board information
(04)break router breakpoint information
(05)
(06)class-map show class-map configuration
--More--
6
Input 6 ，select class-map option
Key Word:
Q(quit)
(00)WORD class-map name
<cr>
Please Input the code of command to be excute(0-0): 0
Input 0，select WORD option：
Please input a string:name
Note: Input class map names here, name is only for example.
Will you excute it? (Y/N):y
The screen will display the configuration like the following lines:
Class-Map name
match access-group name
custom queue list configuration
Display the class-map configuration.
config-class-map
Bakup status
Model Name
Purpose
- 404 -