D-Link DI-1750 Reference Manual page 144

2. Example 2
Connect local ISDN BRI interface with center ISDN BRI interface
Network requirement: D-LINK® 1750 router interconnects with the center ISDN PRI interface through
ISDN BRI interface which implements IP network protocol.
Configuration steps
Configuring the ISDN BRI interface of D-LINK 1750 router:
！configuring the type of global ISDN switch
[DEFAULT@Router /config/]#isdn
(00)switch-type
(01)tei-negotiation
Please Input the code of command to be excute(0-1): 0
(00)basic-1tr6
(01)basic-5ess
......
Please Input the code of command to be excute(0-10): 1
Will you excute it? (Y/N):y
！configuring the IP address of interface:
[DEFAULT@Router /config/]#interface
......
(03)Async
(04)BRI
......
Please Input the code of command to be excute(0-11): 4
Please input a interface name:b2/0 （input the interface name）
Will you excute it? (Y/N):y
Key Word:
U(undo) D(default)
......
(19)ip
(20)mtu
......
Please Input the code of command to be excute(0-32): 19
Key Word:
U(undo) D(default)
(00)access-group
(01)address
......
Please Input the code of command to be excute(0-18): 1
(00)A.B.C.D
(01)negotiated
Model Name
Figuer 5-14
Select the ISDN switch type
Set when ISDN TEI negotiation should occur
1TR6 switch type for Germany
AT&T 5ESS switch type for the U.S.
Asynchronous interface
ISDN Basic Rate Interface
Q(quit)
IP configuration commands
Set the interface MTU
Q(quit)
Specify access control for packets
IP address
IP address
IP address negotiated over PPP or via DHCP
- 142 -