D-Link DI-1750 Reference Manual page 222

Key Word:
U(undo) D(default) Q(quit)
(00)access-group
(01)address
(02)beigrp
(03)directed-broadcast Enable forwarding of directed broadcasts
(04)fast-switch
......
(18)unnumbered
(19)unreachables
Please Input the code of command to be excute(0-19):2
input 2，Select beigrp option
Key Word:
Q(quit)
(00)bandwidth-percent
(01)hello-interval
(02)hold-time
(03)passive
(04)split-horizon
(05)summary-address
Please Input the code of command to be excute(0-5): 2
input 2，Select hold-time option
Key Word:
Q(quit)
(00)<1-65535>
Please Input the code of command to be excute(0-0): 0
input 0，Select <1-65535> option
Please input a digital number:Please input a string:30
Note:here input the timeout，30 is only an example.
Will you excute it? (Y/N):y
6.10.11 Disabling Horizonal Split
In normal case we want to use horizontal split which will forbid the routing information got from an
interface to be broadcasted from the same interface. Thus we can avoid routing loop. But in some
cases this action is not optimal and we can use command below to inactivate horizontal split:
Ip (undo) beigrp split-horizon
In the directory of configuring interface Select ip Command
Key Word:
U(undo) D(default) Q(quit)
(00)access-group Specify access control for packets
(01)address IP address
(02)beigrp Enhanced Interior Gateway Routing Protocol
(03)directed-broadcast Enable forwarding of directed broadcasts
......
Please Input the code of command to be excute(0-19): u
Key Word:
U(undo) D(default) Q(quit)
Specify access control for packets
IP address
Enhanced Interior Gateway Routing Protocol
Fast-Switch interface commands
Enable IP processing without an explicit address
Enable sending ICMP Unreachable messages
Set BEIGRP bandwidth limit
Configures BEIGRP hello interval
Configures BEIGRP hold time
Suppress routing updates on an interface
Perform split horizon
Perform address summarization
Seconds before neighbor is considered down
Command
Model Name
Function
Disable horizontal split
- 220 -