D-Link DI-1750 Reference Manual page 395

Key Word:
U(undo) D(default) Q(quit)
(00)<1-16> Queue list number
Please Input the code of command to be excute(0-0): 0
Select <1-16>option and input the list number Input0at prompt:
Please input a digital number::1
Note: Input 1-16 list numbers here, 1 is only for example.
Will you excute it? (Y/N):y
9.2.8 Configuring Customed Queueing List
The customed queueing can define the custom queueing lists, and specify the approximate number of
bytes to be forward and the total number of the queues. When applying the list to an interface, you can
adjust the parameters according to the list.
To specify the total number of the queues and the approximate number of bytes to be forwarded, use
one of the following commands in global configuration mode:
queue-list
queue-number limit limit-number
queue-list
queue-number
byte-count-number
To configure the upper limit of the CQ list, you can input in the global configuration list:
[DEFAULT@Router /config/]#queue-list
Key Word:
U(undo) D(default) Q(quit)
(00)<1-16>
Please Input the code of command to be excute(0-0): 0
Input 0, select <1-16>option and it will prompt the follwing list:
Please input a digital number:1
Note： Input 1-16 list numbers here, 1 is only for example.
Key Word:
Q(quit)
(00)interface
(01)protocol
(02)queue
(03)default
Please Input the code of command to be excute(0-3): 2
Input 2 and select queue option:
Key Word:
Q(quit)
(00)<0-16> Queue number
Please Input the code of command to be excute(0-0): 0
Input 0, select <1-16>option and it will prompt the queue menu:
Please input a digital number:1
Note： Input 1-16 queue number here, 1 is only for example.
Key Word:
Q(quit)
(00)byte-count
Command
list-number queue
list-number queue
byte-count
Queue list number
Establish priorities for packets from a named interface
Establish priorities for packets of a protocol
configure parameters for a particular queue
set custom queue for unspecified packets
specify size in bytes of a particular queue
Model Name
Purpose
Specifies the maximum number of packets allowed in
each of the custom queues. The limit-number argument
specifies the number of packets that can be enqueued
at any one time. The range is 0 to 32767.The default
value is 20.
Designates the number of bytes forwarded per queue.
The byte-count-number argument specifies the min
number of bytes the system allows to be delivered from
a given queue during a particular cycle. The default
value is 1500.
- 393 -