D-Link DI-1750 Reference Manual page 123

ppp
[pap|chap|ms-chap]
ppp multilink
[DEFAULT@Router /config/]#interface
Key Word:
U(undo) D(default)
......
(09)Multilink
(10)Virtual-template
(11)Virtual-tunnel
Please Input the code of command to be excute(0-11): 9
Please input a interface name:m1 （input Multilink-group interface name）
Will you excute it? (Y/N):y
Key Word:
Q(quit)
......
(14)interface
(15)ip
......
Please Input the code of command to be excute(0-30): 15
Key Word:
U(undo) D(default)
(00)access-group
(01)address
......
Please Input the code of command to be excute(0-21): 1
Key Word:
Q(quit)
(00)A.B.C.D
(01)negotiated
Please Input the code of command to be excute(0-1): 0
Please input a IP Address:10.0.0.1 255.0.0.0 （input ip address）
Key Word:
Q(quit)
(00)secondary
(01)<cr>
Please Input the code of command to be excute(0-1): 1
Will you excute it? (Y/N):y
Key Word:
Q(quit)
......
(22)ppp
(23)priority-group
......
Please Input the code of command to be excute(0-30): 22
Key Word:
U(undo) D(default)
......
(04)ipcp
(05)lcp
......
Please Input the code of command to be excute(0-9): 5
Key Word:
Q(quit)
......
(04)open
(05)enddisc-type
Model Name
(Optional)enable PPP authentication
authentication
Enable Multilink PPP.
Q(quit)
Multilink-group interface
Virtual template interface
Virtual tunnel interface
interface configuration
IP configuration commands
Q(quit)
Specify access control for packets
IP address
IP address
IP address negotiated over PPP or via DHCP
Make this IP address a secondary address
Point-to-point protocol
Assign a priority group to interface
Q(quit)
Set IPCP parameters
Set LCP parameters
Open LCP connection
Select enddisc type
- 121 -