D-Link DI-1750 Reference Manual page 493

Select the IIC2 commands from the interface commands of the global configuration list, all IIC2
selection as fellow:
Key Word:
U(undo) D(default) Q(quit)
(00)ack-max the Max I-frames received before sent acknowledgment
(01)ack-delay-time the Max time to delay the acknowledgment of I-frames
(02)holdqueue the max queue lenght
(03)idle-time the timer for idle
(04)local-window the local window size
(05)n2 the retrying counts
(06)t1-time the timer of receiving an acknowledgment
(07)tbusy-time the timer of re-querying remote busy
(08)tpf-time the timer of receive a response PDU(F=1)
(09)trej-time the timer of receiving a reply to a sent REJ PDU
Please Input the code of command to be excute(0-9): 7
Input 7，select <tbusy-time> item
Key Word:
Q(quit)
(00)<1-60> seconds -- the time interval for an indication of the clearance
Please Input the code of command to be excute(0-0): 0
Please input a digital number:12
Input 12，set the remote-busy time as 12s
Will you excute it? (Y/N):y
14.2.4 Configure the response time
llc2 tpf-time seconds
llc2 (undo) tpf-time
Note:
Sometimes a LLC2 station need to know the status of opposite terminal, so the station will send a command frame that need
to response by opposite terminal; The opposite terminal will send back an answer frame while received the command frame.
If error occurred, the sending terminal is keeping wait. To avoid this matter, you should start a timer. If the responsing time
expires, the sending terminal will send another command frame; This command use for set the time of wait for the response
command frame from opposite terminal.
Select the IIC2 commands from the interface commands of the global configuration list, all IIC2
selection as fellow:
Key Word:
U(undo) D(default) Q(quit)
(00)ack-max the Max I-frames received before sent acknowledgment
(01)ack-delay-time the Max time to delay the acknowledgment of I-frames
(02)holdqueue the max queue lenght
(03)idle-time the timer for idle
(04)local-window the local window size
(05)n2 the retrying counts
(06)t1-time the timer of receiving an acknowledgment
(07)tbusy-time the timer of re-querying remote busy
(08)tpf-time the timer of receive a response PDU(F=1)
(09)trej-time the timer of receiving a reply to a sent REJ PDU
Please Input the code of command to be excute(0-9): 8
Model Name
Command
- 491 -
Function
This command use for control the remote response time
seconds Number of seconds (s) the router waits the
response from remote station. The minimum is 1 s. The
maximum is 60s. default is 1.
Cancel the configuration