D-Link DI-1750 Reference Manual page 310

ip access-list
list-name
permit source-address
Step1：
In the parameter prompt Select 17 option ，prompt is as below:
(00)access-group
......
(06)igmp
......
Please Input the code of command to be excute(0-22): 6
input 6，Select igmp option ，prompt is as below:
(00)helper-address
(01)immediate-leave
......
Please Input the code of command to be excute(0-8): 1
input 1，Select immediate-leave option ，prompt is as below:
(00)group-list access list to specify groups
Please Input the code of command to be excute(0-0): 0
input 0，Select group-list option ，input
Step2：
In global configure directory input ipCommand，prompt is as below:
(00)access-list
(01)as-path
......
Please Input the code of command to be excute(0-22): 0
input 0，Select access-list option ，prompt is as below:
(00)extended
(01)standard
Please Input the code of command to be excute(0-1): 1
input 1，Select standard option ，prompt is as below:
(00)WORD Standard Access-list name
Please Input the code of command to be excute(0-0): 0
input 0.Select WORD option ，prompt is as below:
Please input a string:
list-name.
input
Step3：
In the IP standard access list configuration Select 12 option ，prompt is as below:
(00)any Any source host
(01)A.B.C.D Address to match
Please Input the code of command to be excute(0-1): 1
input 1，Select A.B.C.D option ，prompt is as below:
Please input a IP Address:
input source-address.
Since numerous different exists between IGMP-Router v1 and v3 on processing leave message, the
upper configuration command is invalid to IGMP-Router v1 and v3.
Example of configuring IGMP Immediate-leave list
The following example demonstrates the whole process of a system manager configuring the access
list allowing "immediate leave" to be imme-leave on a port (ethernet 0/0 in the example) and adding an
IGMP host address (192.168.20.168 in the example) into this access list. After these configuration
Model Name
group".
Create an IP standard access list whose name
standard
is list-name.
Configure the IGMP hosts we wish to implement
"immediate leave" in IP standard access list.
Specify access control for packets
IGMP interface command
relay igmp packet
leave groups immediately without sending query
list-name
Named access-list
BGP as-path access list definition
Extended Access List
Standard Access List
.
- 308 -