D-Link DI-1750 Reference Manual page 485

gw-accounting-h323
Configure the method of sending RADIUS costing information:
There's no default method for the costing request corresponding from RADIUS Client to RADIUS.
Please perform the following configuration in global mode:
aaa accounting connection h323
{none | wait-start | stop_only |
start_stop}
Examine Tips
You can examine your ivr configuration through the following task:
Use Command show voip ivr configuration to show relevant ivr configuration.
Troubleshooting Tips
If there's some trouble in using ivr voice exchanging or costing authentication, you can complete the
following tasks to resolve the problems:
Examine radius configuration，Examine aaa configuration.
Use command show voip ivr configuration to examine ivr configuration on these devices.
Use command show voip ivr ivri-session、 show voip ivr call-instance to show the running
instructure information.
Use command debug voip event ivri、debug voip event ivrc、debug voip event ivrp for debug.
13.1.7 Examples of IVR costing authentication
1. Example 1- configuration of different ivr pattern
2621_1 configuration
2621_1_config#dial-peer voice 10 pots
2621_1_config_dialpeer #des 1001
2621_1_config_dialpeer #exit
2621_1_config#dial-peer voice 11 pots
2621_1_config_dialpeer #des 1002
Command
Enabling/Closing off the accounting function of all the
subscribers.
Command
Figuer 13-1 IVR authentication costing configuration
Model Name
Function
Function
Configuring the method
information
- 483 -
for sending accounting