D-Link DI-1750 Reference Manual page 545

(01)add add VLANs to the current list
(02)all all VLANs
(03)except all VLANs except the following
(04)none no VLANs
(05)remove remove VLANs from the current list
Please Input the code of command to be execute(0-5): 0
Please input a string:1-10
Will you execute it? [Y]:
16.2.3 Inspect the configuration and status of VLAN
To monitor VLAN configuration and status, users may use the following commands under supervisor
mode.
show vlan {id ......| interface ......}
Display all VLAN information:
[DEFAULT@lns /config/]#show
Key Word:
Q(quit)
......
(53)vlan
......
Please Input the code of command to be execute(0-59): 53
Key Word:
Q(quit)
(00)id
(01)interface
(02)<cr>
Please Input the code of command to be execute(0-2): 2
Will you execute it? [Y]:
VLAN Status Name
---- ------- ---------------- -------------------------------------------------
2 Static VLAN0002
3 Static VLAN0003
Status indicates which module creates the VLAN. Statics stands for the VLAN was created by configuration and
Dynamic by configuring GVRP protocol.
Display physical information of certain VLAN.
[DEFAULT@lns /config/]#show
Key Word:
Q(quit)
......
(53)vlan
......
Please Input the code of command to be execute(0-59): 53
Key Word:
Q(quit)
(00)id
(01)interface
(02)<cr>
Please Input the code of command to be execute(0-2): 0
Key Word:
Q(quit)
(00)<1-4094>
Please Input the code of command to be execute(0-0): 0
Command
Display VLAN configuration and status.
vlan information
VLAN status by VLAN id
VLAN status of One interface
Ports
F1/0
F1/0
vlan information
VLAN status by VLAN id
VLAN status of One interface
VLAN IDs 1-4094
Model Name
Function
- 543 -